Our Products
Brand: SOUBER TOOLS
MPN: ST JIG 1C
DBB
Morticer Set
The DBB Morticer, manufactured by Souber Tools, produces a perfect lock
recess every time. It is a genuine 5-minute morticer which is acclaimed by
locksmiths and builders alike. For anyone who regularly fits mortice locks it
will prove invaluable - an accurate, speedy and professional tool that will save
time and money.
Standard Morticer Set complete with:
One wood cutter
plastic carrying case
Instruction Manual
Standard shaft (for locks up to 100mm)....
N$ 5,154.30
Ex VAT:N$ 4,482.00
Brand: TORK CRAFT
MPN: EG1
Lock mortising attachment
Jig to be used with an electric drill to bore out a mortise to fit a door lock.
Application:
The jig is clamped onto a door to cut a mortise for the fitment of a door lock.
A drill is attached to the jig with the following requirements:
The chuck needs to be removed to expose the 20UNF thread.
The drill will be clamped on the collar (ø46mm).
The drill will be part of the jig and will thus be a semi-permanent addition.
The cutting length and de..
N$ 6,207.70
Ex VAT:N$ 5,398.00
Brand: AIRCRAFT
MPN: AT0015-32
AirCraft Lock Pin for Air Ratchet Wrench 3/8" (AT0015-32) for Model AT0015
At a Glance: OEM-fit replacement lock pin for the AirCraft AT0015 3/8" air ratchet wrench, used to locate/secure key parts in the ratchet assembly.
The AirCraft AT0015-32 lock pin is a replacement locating/retaining pin used in the AT0015 3/8" air ratchet wrench assembly. Lock pins play a critical role in keeping components aligned and secured under load, helping the ratchet mechanism operate smoothly and consistently. ..
N$ 8.97
Ex VAT:N$ 7.80
Brand: TORK CRAFT
MPN: TCMT001-10-11-12
Spare part for TCMT001
Application:
These are spare parts that are used to replace the spindle locking pin
mechanism of the
TCMT001 rotary tool.
Spare parts for the TCMT001 rotary tool:
TCMT001-1
Plastic nose piece
TCMT001-10-11-12
Spindle locking mechanism
TCMT001-13
On-off switch
TCMT001-16
Variable speed switch & PC board
TCMT001-5
Armature with bearing & fan
TCMT001-8
Stator (field coil)
..
N$ 16.33
Ex VAT:N$ 14.20
Brand: TORK CRAFT
MPN: CM99
Left hand Thread Screw
Special
screw with left hand screw thread to lock a chuck to the motor shaft. This screw
performs a very important role. If one uses a
drill in reverse rotation, the chuck will come off. This screw locks the chuck
in place. For your own safety, always install the screw when replacing a chuck.
Chuck removal:
To remove the chuck, loosen the screw by turning it in the clockwise direction.
The chuck loosens in the normal direction i.e. turning anti- clockwise
..
N$ 32.20
Ex VAT:N$ 28.00